Products
More Categories Less Categories

Product Details

Catalytic Scrubber

Catalytic scrubber is important to remove toxic gases and make the pollutants into simple non-hazardous components. Apzem developed a catalytic dry scrubber for this purpose. The catalytic scrubber works on principle of chemisorption process. Chemisorption is an adsorption process which involves chemical reaction between the toxic pollutants and chemical present on the surface of adsorbents. This type of scrubber consist of catalyst which adsorbs the gaseous pollutants and reacts with them to make into simple components.

Product Catalogue
Categories: ,

Share this product

Description

Catalytic Scrubber

Catalytic scrubber is important to remove toxic gases and make the pollutants into simple non-hazardous components. Apzem developed a catalytic dry scrubber for this purpose. The catalytic scrubber works on principle of chemisorption process. Chemisorption is an adsorption process which involves chemical reaction between the toxic pollutants and chemical present on the surface of adsorbents. This type of scrubber consist of catalyst which adsorbs the gaseous pollutants and reacts with them to make into simple components. Unlike normal adsorption dry scrubber, the catalytic scrubber will not be affected by contact time and inlet pollutant concentration. When the catalyst is saturated with pollutants, this can be easily taken back and replace with new catalyst. This type of scrubber is suggested for exhaust with low concentration of toxic gases, because of life time of catalyst. It can also be used for exhaust with high concentration. However, the catalyst will be saturated within a short period of time. It can also be used for emergency applications, where there is higher pollutant contamination risk.

  • Performance Guaranteed
  • Low maintenance
  • Low pressure drop, Minimal energy cost
  • No water, ETP is not required
  • No hazardous by-product
  • Performance Guaranteed
  • Low maintenance
  • Low pressure drop, Minimal energy cost
  • No water, ETP is not required
  • No hazardous by-product
  • flow Air rate: 100 to 1200 Standard liter per minute (slm) or (6 to 72 Cubic meter per hour)
  • Concentration:  1 ppm to 200 ppm (continuous) up to 2000 ppm (Intermittent)
  • Removal efficiency: up to 99.99 %
  • Material of Construction: MS with Epoxy lining
  • Construction: Heavy Gauge, Fully welded cabinet, robust construction

Dimensions

Model Air flow rate (CFM) Dimension

Diameter (mm)

Height (mm)
ADS-30 100 300 1400
ADS-45 300 450 1500
ADS-60 500 600 1500
ADS-75 800 750 1650
ADS-90 1000 900 1700
ADS-105 1500 1050 2000

Related Industries

STILL NOT SURE WHAT TO DO?

We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.



X
Quick Enquiry