Product Details

Metal Etch Scrubber

Traditionally etching was performed by hand. It was implemented by using sharp tipped tool to etch metal according to desired design pattern. This process is time consumable. Nowadays the most popular metal etching is acid etching as the chemical technology has improved, since chemical milling is much faster than mechanical milling. Metal etching is process of creating design on metal surface using acid or mordant. The most commonly used chemicals are nitric acid, hydrochloric acid, potassium chlorate and Ferric Chloride. These acids will be used in different concentrations.

Product Catalogue

Share this product

Description

Metal Etch Scrubber

Traditionally etching was performed by hand. It was implemented by using sharp tipped tool to etch metal according to desired design pattern. This process is time consumable. Nowadays the most popular metal etching is acid etching as the chemical technology has improved, since chemical milling is much faster than mechanical milling. Metal etching is process of creating design on metal surface using acid or mordant. The most commonly used chemicals are nitric acid, hydrochloric acid, potassium chlorate and Ferric Chloride. These acids will be used in different concentrations.

 

Metal etching Types

  • Acid etching
  • Aluminium etching
  • Brass etching
  • Chemical etching
  • Copper etching
  • Photo etching

The acids used in metal etching are extremely corrosive and the fume generated from the process attack all tissues of the body.

Apzem approach is to eliminate acid fumes from your process using adsorption technology. Specialized adsorption media will be used to get higher removal capacity rather than normal media. The saturated media can be disposed easily in non-hazardous landfills. The scrubber is available as portable and centralized scrubber system based on conditions and requirements.

  • Performance Guaranteed
  • Low maintenance
  • Low pressure drop, Minimal energy cost
  • No water, ETP is not required
  • No hazardous by-product
  • Chemical Reactor vents
  • Laboratory
  • Hospital
  • Food processing area
  • Storage tank vent
  • Air flow rate from 50 CFM to 2000 CFM
  • Concentration:  1 ppm to 200 ppm (continuous) up to 2000 ppm (Intermittent)
  • Removal efficiency: up to 99.99 %
  • Material of Construction: MS with Epoxy lining
  • Construction: Heavy Gauge, Fully welded cabinet, robust construction

Dimensions

Model Air flow rate (CFM) Dimension

Diameter (mm)

Height (mm)
ADS-30 100 300 1400
ADS-45 300 450 1500
ADS-60 500 600 1500
ADS-75 800 750 1650
ADS-90 1000 900 1700
ADS-105 1500 1050 2000
ADS-120 2000 1200 2200

 

Blower: Direct drive, High efficiency, Low noise

Related Industries

STILL NOT SURE WHAT TO DO?

We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.



X
Quick Enquiry