Product Details

laboratory scrubber

 Portable Laboratory  Dry scrubber

There has been enlarged importance on health and safety of laboratory workers and as well as environmental concerns. In recent years, Government set stringent condition to control emission from exhaust from laboratories. Testing in research laboratories often generates vapors, acids, solvents or VOCs. The vapor produced can be low concentration. However, the vapor will be accumulated over the period of time and often disperse in low-lying areas, there by increasing the concentration above the Permissible exposure Limit and IDLH. Hence it is required to capture toxic gases coming from test vessels and filter before releasing into the room.

Product Catalogue

Category:

Share this product

Description

Portable Laboratory Dry scrubber

laboratory scrubber

  • There has been enlarged importance on health and safety of laboratory workers and as well as environmental concerns. In recent years, Government set stringent condition to control emission from exhaust from laboratories. Testing in research laboratories often generates vapors, acids, solvents or VOCs. The vapor produced can be low concentration. However, the vapor will be accumulated over the period of time and often disperse in low-lying areas, there by increasing the concentration above the Permissible exposure Limit and IDLH. Hence it is required to capture toxic gases coming from test vessels and filter before releasing into the room.
  • Apzem developed a portable dry scrubber which can remove hazardous/toxic vapor generates from chemical laboratory. Portable dry scrubber is an unit which pulls the fumes containing toxic gases and particulates from emission source, filters the contaminants and leaves cleaned air.
  • It is designed especially for source capturing of fumes directly without having duct connections. This avoid spreading of vapor to nearby areas. It is capable of removing fumes up to 99 % before releasing into the air. The dry scrubber has pre-filter and carbon filter, which are easily removable for maintenance or renewal when it is saturated.

 

Carbon filter

  • carbon filter is used to adsorb solvents, inorganic and organic vapors. It has large number of pores, provide high surface area to trap/adsorb odor and chemical fumes.
  • The filters will become saturated with pollutants and should be replaced to get efficiency. The efficiency of filter depends on pollutants characteristics and adsorption capacity, usually 99 %.
  • Effectiveness of carbon is not based on carbon quantity but the adsorption isotherm. The higher the adsorption capacity, the more pollutants will be adsorbed on carbon.
  • We use variety of carbon grades in portable dry scrubber depending on chemicals.

 

Laboratory Fumes

  • Fumes from acid digestion: Kjeldahldigestion, Microwave, Hot plate
  • Chemicals used in laboratory
  • Ammonia
  • Acetone
  • Acids gases (H2S, HF, Perchloric acid)
  • Formaldehyde
  • Acrylic acid
  • Ethyl acetate
  • Benzene
  • Toluene
  • Other high molecular weight solvents

 

We have three models in portable dry scrubber based on requirements

  • ADS-100
  • ADS-250
  • ADS-500

Advantages of Laboratory Scrubber 

  • Protect workers from health effects
  • Minimize contamination
  • Better environment for workers
  • Meeting compliance with pollution control regulations

 Features of Laboratory Scrubber 

  • Chemical testing labs
  • Analysis
  • Metallurgy Labs
  • Research Labs
  • Acid etching process
  • Solvent coating process
  • Chemical experiments
  • Solvent cleaning
Specifications 100 CFM 250 CFM 500 CFM
Model No. ADS-100 ADS-250 ADS-500
Air Handling Volume 100 CFM 250 CFM 500 CFM
Dimensions 350 mm (D) X 900 mm (H) 500 mm (D) X 1050 mm (H) 700 mm (D) X 1250 mm (H)
Material of Construction §Carbon Steel

§Heavy Gauage

§Fully Welded Cabinet

§Anti corrosive coating

§Carbon Steel

§Heavy Gauage

§Fully Welded Cabinet

§Anti corrosive coating

§Carbon Steel

§Heavy Gauage

§Fully Welded Cabinet

§Anti corrosive coating

Removal Method Chemical Adsorption Chemical Adsorption Chemical Adsorption
Filters §Prefilter

§Carbon filter (Specialized for acid and solvents)

§Prefilter

§Carbon filter (Specialized for acid and solvents)

§Prefilter

§Carbon filter (Specialized for acid and solvents)

Removal Efficiency §Above 99 % for acids and high molecular weight VOCs (M.W. above 80)

§Above 96 % for low molecular weight VOCs (M.W. between 30 to 80)

§

§Above 99 % for acids and high molecular weight VOCs (M.W. above 80)

§Above 96 % for low molecular weight VOCs (M.W. between 30 to 80)

§Above 99 % for acids and high molecular weight VOCs (M.W. above 80)

§Above 96 % for low molecular weight VOCs (M.W. between 30 to 80)

Scrubber inlet port size 75 mm dia. 100 mm dia. 150 mm dia.
Power Supply 0.37 KW/0.5 HP

3 Phase

0.75 KW/ 1 HP

3 Phase

0.75 KW/ 1 HP

3 Phase

Noise level Less than 65 dB Less than 69 dB Less than 69 dB

https://www.apzem.in/index.php/product/laboratory-scrubber/

Related Industries

× How can I help you?
STILL NOT SURE WHAT TO DO?

We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.


X
Quick Enquiry